Rm 1506, 28# Moyu Rd, Shanghai, China, 201805
Casa ProdutosGear Pumps

NACHI IPH-56B-50-80-11 IPH Series Double IP Pump

NACHI IPH-56B-50-80-11 IPH Series Double IP Pump

NACHI IPH-56B-50-80-11  IPH Series Double IP Pump

Detalhes do produto:

Place of Origin: JP
Marca: NACHI
Model Number: IPH-56B-50-80-11
Descrição de produto detalhada

NACHI IPH-56B-50-80-11  IPH Series Double IP Pump
All the types in this new design (11D) series are installation compatible with the previous design (10D). Note, however, that there is no longer compatibility for some of the seal components between the IPH-3 and IPH-4 sizes and the 3 and 4 sizes.
1) Configured with the high-pressure, low-noise IPH Series and IP pumps, these double pumps greatly expand the range of application for the IP pump.
2)A wide selection of pump combinations provides options that are perfect for just about any type of application imaginable.
NACHI IPH-56B-50-80-11  IPH Series Double IP Pump
NACHI IPH-56B-50-80-11  IPH Series Double IP Pump
Note) 1.Maximum Pressure: Maximum pressure limit when there are frequent pressure changes. However, maximum pressure is the same as rated pressure when load is applied to the head
side and shaft side simultaneously.
2.Suction Pressure: +0.02 to +0.3 MPa {−0.2 to +0.3 kgf/cm2}
3.Avoid installation with the suction port towards the bottom of the pump. If the revolution speed will exceed 1800mm-1, provide separate piping for shaft side and head size IN ports.
4.Specify using the model number format shown below when pipe flange is required.
5.Working pressure is continuous operating pressure when the same pressure exists on the head side and shaft side.
6.Individual pump perform performance on the head side and shaft side is the same as that of the single pumps. Required power is the sum of the power required by each of the two
7.The "Required Power at 1200min-1, 21MPa (kW)" column in the above table are based on combinations that provide the maximum capacity for each model number, when pressure at
both the head side and shaft side is 21MPa. Examples of combinations that provide "the maximum capacity for each model number" are IPH-22B-8-8-11 for IPH-22b, and IPH-46B-32-
125-11 for IPH-46B. A capacity of 125 for all *6B Type 6 pumps is used for calculations.
The common pump stock list we have:
IPH-22B-3.5-3.5-11 IPH-55B-40-40-11
IPH-22B-3.5-5-11 IPH-55B-40-50-11
IPH-22B-3.5-6.5-11 IPH-55B-40-64-11
IPH-22B-3.5-8-11 IPH-55B-50-50-11
IPH-22B-5-5-11 IPH-55B-50-64-11
IPH-22B-5-6.5-11 IPH-55B-64-64-11
IPH-22B-5-8-11 IPH-56B-40-100-11
IPH-22B-6.5-6.5-11 IPH-56B-40-125-11
IPH-22B-6.5-8-11 IPH-56B-40-80-11
IPH-23B-3.5-10-11 IPH-56B-50-100-11
IPH-23B-3.5-13-11 IPH-56B-50-125-11
IPH-23B-3.5-16-11 IPH-56B-50-80-11
IPH-23B-5-10-11 IPH-56B-64-100-11
IPH-23B-5-13-11 IPH-56B-64-125-11
IPH-23B-5-16-11 IPH-56B-64-80-11
IPH-23B-6.5-10-11 IPH-66B-100-100-11
IPH-23B-6.5-13-11 IPH-66B-100-125-11
IPH-23B-6.5-16-11 IPH-66B-125-125-11
IPH-23B-8-10-11 IPH-66B-80-100-11
IPH-23B-8-13-11 IPH-66B-80-125-11
For more information, please download the below IPH Series Double IP Pump datasheet:


IPH Series Double IP Pump



Saar HK Electronic Limited

Pessoa de Contato: Mr. Jason Liu

Telefone: 86-21-59561370

Fax: 86-21-50123536

Envie sua pergunta diretamente para nós (0 / 3000)

Outros Produtos